I use it to register my home made trail maps for loading with Mapsource. Just a thought to throw out. I then downloaded all data from my GPS and created a new separate folder to work with. Since the new download contained some of the same data already in other folders, I was going to delete the duplicated data in the new download folder and rename the folder to "latest data" or similar.
And thank you for doing that! Maybe that's the way it is "Supposed to" work, but on mine, the arrow just sits on the starting point and occasionally jumps around that one trackpoint, but never advances.
I had to select the X multiplier to get it to move The speed multiplier is "relative to" how far you are zoomed in. I can't see how anything below X5 will ever get used.
Zoomed out where you can see an entire medium length miles track, you won't see any movement except at X, or possibly X Apparently due to the different times the trackpoints were logged. Awesome, I couldn't get any 3D under Fusion because it needs 1. My homebrewn maps with DEM do work. However there is still no information of how to compile your own DEM.
So you have to include a DEM from a commercial Garmin map to your own. The process of doing this is however very very advanced and good description only available in Spanish. It is nice however to create your own routable mountainbiking map out of OSM data, add a DEM and then being able to show a nice profile besides your autoroute.
In my turn to try it. Hyper-hyper slooooowww on my toshiba laptop. And when i want to switch from 3D to 2D map or vice versa, basecamp crashes. Perhaps it's to cut down on the resources required for generating 3-D imagery. Think how slow it would be if it went to the horizon!
I didn't notice it being that slow, but I did see other resource intensive apps Firefox slow to a crawl while Basecamp was running. GoogleEarth is much faster, and in terms of visualization for hike planning, it seems that GoogleEarth exploits more resources see below I don't see what Garmin's Basecamp brings to the table.
Do you think you could post a link to those spanish instructions? I'll just have google translate the page. I've got a bunch of 10meter DEM's that are dying to show up in a custom mapset. As I understand it, he is saying you can not use your own DEM data. I assume you need to extract the DEM data from and existing Garmin map product and stitch it into your own custom map.
Found a bug. You can post now and register later. If you have an account, sign in now to post with your account. Note: Your post will require moderator approval before it will be visible. Paste as plain text instead. Only 75 emoji are allowed. Display as a link instead. Clear editor. Upload or insert images from URL.
All Activity Home Geocaching and Followers 7. Reply to this topic Start new topic. Prev 1 2 Next Page 1 of 2. Recommended Posts. Posted March 30, edited. NET framework 2. Edited March 30, by allory. Link to comment. Posted March 30, Some examples of products that contain elevation data are Topo Canada version 4 ,. Topo GB v2 Edited March 30, by strumble. Only mapset I have that is compatible is Topo US I'm with Red Topo Can V4 mmmmmm cant wait.
Edited March 30, by savant9. MtnHermit Posted March 31, Posted March 31, Unlike mapsource, it doesn't allow you to just drag and drop a. They have not forgotten us! What is the performance like on an ordinary PC?
Detailed track tool: Geotagging photos:. Fixed issue canceling route calculations. Fixed out of memory crashes related to the undo buffer growing too large. Fixed incorrect total space shown in the Device Information dialog for some nuvi and zumo devices.
Fixed an issue with BaseCamp prompting that old software updates are available. Fixed other various bugs. Fixed some issues sending data to devices Fixed issue with cancelling a route calculation while editing data on the device Fixed issue with FIT activities not being read from the etrex Touch Fixed route vias showing up in the locations list of the fenix 3 and epix Fixed various issues when disconnecting the device while editing data on the device.
Fixed problem scrolling in trip planner Fixed problems reading some 3rd party maps Fixed problem with search in the route dialog Fixed not being able to export to text files Fixed issue writing Garmin Custom Maps files. Added user preference to configure mouse hover tool tips Added selection of map product and search to the Create Route dialog Added menu item to launch the Create Route dialog Added hotkey Ctrl to draw direct route segments while routing Added postal code searches for supported map products Added ability to add and edit certain data directly on PND devices data that has not yet been read by the device Added ability to manage waypoints on the fenix 3, including delete requires firmware version 4.
Added icons for VIRB action camera and wearable devices Made it easier to see and access BirdsEye help Improved first time speed of quick search and address search Improved street matching in address search Improved handling for Google Earth's discontinued support Updated Garmin Express instructions Fixed routes sent to nuvis and zumos not displaying Junction View Fixed reading track time from VIRB X action cameras Fixed issue where route information was not showing in map tool tips Fixed issue where memory cards would not display for some devices Fixed issues with Garmin Custom Maps Fixed issues exporting KML files Fixed crash exporting trips Fixed crashes opening trips Fixed crash when disconnecting Base Station devices Fixed crash after opening GPX files with far future timestamps Improved error handling with some devices Fixed various bugs Added support for new TDB flags from cartography no files are in the field yet Includes brute force street name searching.
Fixed not being able to insert track points at the end of a track Fixed GPI files not being read from SD cards Fixed not receiving FIT locations from the fenix 3 Fixed Trip Planner printout not showing correct times Fixed error calculating statistics when multiple tracks are selected. Added back the 'Create BirdsEye from selection' menu item when the selection contains BirdsEye Fixed odd selection behavior when using the Hand tool to pan the map Fixed issue with inserting route or track points with the hand tool not always choosing the correct insert location.
Now supports preserving the shape of track sections that aren't near a road. This was added to prevent startup issues with misbehaving graphics drivers. Fixed issue when transferring data to a device after upgrading from BaseCamp 4.
This is now only enabled by default for zumo devices. Fixed problem with marine heights being displayed incorrectly Fixed issues when reading GPX files that contain invalid times Fixed odd rendering on newer City Navigator maps Fixed issues with inconsistent track stats Fixed Select All in lists not selecting the last item Fixed issues when attempting to transfer data to read-only cards or fitness devices that don't accept BaseCamp generated data.
Fixed issue with looking up user manuals for devices Fixed issue with viewing the elevation graph for tracks Fixed issue with renaming a track while track points were selected Fixed issue with importing a GPX file that contained a route that uses several transportation modes Fixed various issues after erasing custom activity profiles Fixed sending Garmin Adventures to devices Fixed various issues when a device is unplugged while BaseCamp is using it.
Fixed issue when trying to install over an older version. Fixed issue when importing a file and errors or warnings are encountered in the file Fixed issue with adding or editing an activity profile Fixed issue with changing the cover photo of an Adventure Fixed issue when joining tracks. Fixes for several startup issues Fixed error after ejecting a device Fixed the Device Transfer Options page not being enabled.
FINAL Windows XP Release Fixed strings being displayed in multiple languages in the UI Fixed long delay when changing the activity profile of a route on the route dialog Fixed long delay when converting a track into a route Fixed issue where changing the activity profile of an individual route leg wasn't applied unless one of the via times was also changed Fixed issue clicking Next on the geotagged photo properties dialog when there is only one photo in the list Fixed long delays when selecting many points in the track point list Fixed long delays when pasting many points in the track point list Improved robustness of auto-saving user data.
Fixed error when deleting the last track point in a track Fixed 'Arrive Continue' guidance issue on zumo Fixed address search issue when running in languages other than English Fixed user data from FIT files not being read from the Edge Fixed error when removing user data from a list or list folder Fixed error when using Trip Planner Fixed error when selecting a track to create an Adventure from.
Fixed start-up issue when opening some Map Installations Fixed start-up issue with opening Trip Planner Fixed various issues with upgrading legacy databases Fixed issue searching for named trails Fixed activity based routing Fixed issue with editing routes received from a device Fixed issue when using find.
Fixed an issue with Basestation mode. Fixed an issue where BaseCamp would not remember the positioning of the toolbars correctly. Fixed an issue with the address search. Fixed an issue where refreshing a search was using the last location on the map, not the current one.
Fixed an issue where Cutting Ctrl-X a photo on a device would delete the photo and prevent the user from pasting it. Fixed an issue with some Asian language map products. Fixed an issue with deleting track points. Fixed an issue with route creation in a folder. Fixed an issue where the hand tool was not always set as the default tool. Fixed some menu inconsistencies between find results, context menus, and map popup menus.
Changed translations of Walking and Hiking activity profiles in Dutch. GPI was present on the device. Fixed an issue where BaseCamp did not seem to recognize some MTP devices it was taking several minutes for BaseCamp to display the device.
Device detection of such devices should now be much faster. Fixed an issue with Garmin cloud where syncing between Mac and PC would not work properly. Fixed an issue with 'Restore from Previous Version'. Fixed an issue where using the city finder in the Find Options 'Location' textbox would lead to a crash if the map did not support city searches.
Fixed an issue with city search on the Global Map. Fixed an issue with user data search. Fixed a start-up issue. Added support for Garmin Cloud Storage. Added ability to report map errors directly from within BaseCamp.
Implemented Part I of Find experience rework simultaneous searches, less confusing input boxes, added Find menu, added support for user data search. Added support for new statistics track extension, this should allow BaseCamp and future devices to have the same track statistics. Added better error messages for adventure publishing failures. Improved behavior when editing or deleting route and track points in a list, BaseCamp now remembers the position in the list.
Improved decimal precision for low speeds. Fixed an issue where BaseCamp would erroneously prompt for Geotagged photos on Garmin-mode devices. Fixed an issue where the folder data list size wasn't preserved. Fixed an issue where the original routes were not restored after cancelling during the calculation phase of a route join.
Fixed an issue with displaying waypoint comments that take more than 1 row. BaseCamp now prompts the user. Fixed an issue with sending dog icons to older Garmin devices. Fixed an issue with resetting the activity profile.
Fixed an issue where BaseCamp sometimes would not sync with devices. Fixed an issue with restore. Fixed some issues with Undo and Redo. Fixed shutdown issues. Fixed an issue in Danish when viewing route properties. Fixed issue when changing list or folder selection with nearest results shown on the map. Fixed issue when changing list or folder selection while in the process of drawing a route.
Fixed issue with find toolbar visibility not being remembered between application runs. Fixed some issues with publishing adventures. Fixed an issue with remembering the layout of the data and map panels.
Fixed an issue with remembering the positioning of the toolbars. Fixed some layout issues in Windows XP. Fixed ordering of photos during adventure playback. Fixed various stability issues with route properties. Fixed issues with the route and track join. Fixed some device and adventure transfer issues. Fixed issue with gdb and kml import. Fixed issues with adventure playback. Fixed an issue with exporting waypoints with dog icons. Fixed an issue where orphaned route via point would remain on the map in certain cases.
Fixed an issue where geotagged photos were not being cleaned up after deletion. Fixed an issue with the notes tab where links where not being stored properly. Fixed various other stability issues. Improved speed for displaying the properties of an adventure for the first time. Added smoothing of speed and heart rate graphs. Improved Track Join inside of an Adventure Change to not show the 'Filter Results' option in the find results if there are no results to filter.
Fixed layout not being remembered properly between application runs. Fixed an issue with some card products not being recognized. Unfortunately this requires re-indexing all card products. Fixed layout being different after exiting from Adventure playback. Fixed an issue with the 'References' tab page not being properly updated when changing selection. Fixed an issue with route shaping point info being lost when erasing points from a route. Fixed an issue with track color being changed when tracks are filtered.
Fixed an issue with not updating the summary in the route dialog when points are unselected. Fixed some issues with login and re-login for MyGarmin services Fixed doing an undo while drawing a route ending the route. Now only the last via point is removed. Fixed an issue when importing photos with invalid time EXIF data.
Fixed an issue with creating a waypoint via the map context menu when a list folder is selected Fixed an issue where the waypoint ordering was not updated when changing the main track in an Adventure Fixed an issue when clicking on the 'X' to remove a tag from the References tab page.
Fixed an issue when changing map detail level before putting focus into the map views. Fixed an issue where the creation date of a photo waypoint didn't match the creation date of the photo's EXIF data Fixed an issue with waypoints sometimes not being shown on the map. Added Garmin Adventures, including; authoring, publishing, online search, downloading, playback, and transfer to supporting devices.
Added arrival, departure, and layover times for route via-points. Added a context menu on the map for the hand and selection tools. Added support for waypoint creation date, which will not be changed when updating the waypoint. Added a list in the waypoint properties dialog to display which routes a waypoint is used in. Added ability to collapse folder groups like 'My Collection' or 'Devices'. Added support for temperature and pressure in track statistics and graphs. Added support to delete waypoints that are included in a route.
Added Basestation mode for compatible Astro, Rhino, and Alpha devices. Added option to save original track when filtering it. Added display of the 'placed on' date for GeoCaches. Added ability to bulk-edit more fields for waypoints. Added ability to create waypoint from find results on the map.
Added ability to transfer subscription-based BirdsEye imagery that contain failed downloads. Added ability to toggle the visibility of all toolbars.
Added display of postal code in address search results. Added a read-only 'Unlisted Data' list that contains all items that are in no other lists. Added ability to create a route from a named trail. Added ability to import into folders and lists and not always import into My Collection. Added header for the folder data list. Added ability to duplicate geotagged photos. Added link the BaseCamp license agreement in help menu. Added ability to drag and drop folders from the file system to BaseCamp when supported data is present.
Added ability to accept Google Maps coordinate format when centering map at position. Added new dog icons. Added waypoint creation date to the waypoint properties dialog. Added option to encourage the user to recalculate a route when the map that the route was created with isn't found on the device. Added prompt when duplicating a route if BaseCamp should also duplicate the waypoints used in the route.
This is a coarse zoom which zooms in or out a number of zoom levels. Added toolbar and menu for simpler device transfer options. Improved display when many photos are at the same spot on the map. Improved XML processing so it should now be possible to import and export larger gpx files than previously.
Improved the measurement tool's display of measurement information. Improved behavior when importing data into an already selected list or folder. Improved behavior when double-clicking on a list. BaseCamp will now zoom to the data contained in that list. Improved default file name for backup. The default name now contains the current date. Improved the validation of map coordinates in the Recenter dialog. Changed the simple route dialog to transition into the route properties so the route can be edited further.
Changed icon for gas stations with convenience stores to be the gas station icon, not the shopping cart. Clarified the find options Center of view, Center of selected items. Added hint text to make usage more clear.
Cleaned up route options, made it easier to create custom route settings. Fixed the long find toolbar initialization delay after starting BaseCamp or switching to a new map.
Fixed an issue where a device's SD card would not always be recognized by BaseCamp. Fixed numerous issues with finding addresses. Fixed an issue where the toolbar would not display the same way after restarting BaseCamp.
Fixed an issue where the find toolbar would always be displayed after restarting BaseCamp, even though the user chose to hide it. Fixed area calculation for tracks. Fixed an issue where you could not rename an item from lower case to upper case like renaming 'washington' to 'Washington'. Fixed issue where the Geocache symbol was not consistent with found status when importing or adding a geocache.
Fixed an issue where the preferences dialog would not remember the last sub-selection. Fixed an issue with remembering the data filters when switching between app modes. Fixed an issue where turning off the display of points would leave a lot of 'shopping cart' POIs on the map for certain map products.
Fixed an issue where the selection was lost when left-clicking on the map with the hand tool. Fixed issues with deleting data on devices. Fixed issues with creating routes from tracks. Fixed issue when BirsdEye selection box was dragged too far North.
Fixed issue with displaying custom maps on devices. Fixed an error when a new list folder was created while a balloon was visible on the map Fixed an error when creating waypoints or tracks over 3rd party maps that are missing files Fixed some errors when receiving from a device Fixed an error when using BaseCamp with an iPhone connected Fixed an issue with MTP devices with cards greater than 8 GB in size. Fixed a crash when dividing a route with more than one reference to the same waypoint.
Fixed crashes when reading a Map Installed on a card when there are ID conflicts. Changed the range of allowed ID's for card products, this has the side effect of requiring all card products to be re-indexed.
Fixed a crash when a route with the 'None' profile route doesn't have preferences. Fixed a problem where a route that was switched from the 'Direct' profile to 'None' would ever auto-route. Fixed a crash when deleting all waypoints from a route. Fixed a shutdown crash. Fixed a problem with line breaks in GPX files. Fixed a problem when sending. Changed the default value for the mountain bike profile state highway avoidance. Fixed an issue when tracks lose all data besides position after doing a sequence of divide, undo, and redo operations.
Reduced the size of the 'Welcome to BaseCamp' dialog so that it fits on smaller screens. Fixed a problem with the application hanging after doing a 'Reset Options' with some other dialogs open. Fixed a crash when dividing a route from the route points list when that route had more than one reference to the same waypoint. Fixed a crash when changing folder or list selection. Added collapsible list folders and sub-lists for improved organization. Added shaping point support for zumo devices like done in MapSource.
Added explicit support for shaping points. These will be transferred to supporting devices. Added support for transfer of waypoint categories on supporting devices. These are displayed in BaseCamp as lists. Added more activity profiles, with improved activity routing on supported maps. Added specific avoidances for various road classes, removed the road selection slider. Added custom activity profiles.
Added keyboard short-cuts for editing tools divide, insert, erase. Added a tools menu for easier discovery of tool keyboard shortcuts. Changed to make GPX files on a memory card directly editable. Changed to read all GPX files on a memory card, similar to how devices behave. Improved graphing of track data. Improved graphing when multiple routes or tracks are selected. Improved layout of geotagged photo, waypoint, route, and track properties.
Added additional statistics to route and track properties. Added 'Center on map' check-box on route and track dialogs. Added an easier way to add waypoints to routes Insert Waypoint button. Added additional data fields to waypoints such as address and phone number.
0コメント